REPLACEMENT FAN
Published 2012-08-20
REPLACEMENT FAN FOR VGA COOLER / VGA維修扇
STEP 1
.Take out cooling fan from the package.
.產品取出
STEP 2
.Release the screw nut which blocking the inner flank.
.將固定內側的螺母放鬆。
STEP 3
.Tear off the protect membrane on double side tape from vibration absorbing rubbers.
.將防震膠丁雙面膠保護膜撕開。.
STEP 4
.Remove the old (original) fan on the VGA Cooler.
.將舊有的顯卡散熱器上的風扇拆除。
STEP 5
.Combine the fan to VGA Cooler.
.將產品與顯卡散熱器做結合。
STEP 6
.Block the telescoping buckle frame on the cooler fin. (Special note the tape should be stick to the fin.)
.伸縮夾做固定於散熱器的鰭片上。(注意防震膠丁的雙面膠須黏貼住鰭片。)
STEP 7
.Lock the screw nut after blocking the buckle frame.
.固定伸縮夾後,固定螺母鎖緊。
STEP 8
.Completed
.完成
COPYRIGHT EVERCOOL THERMAL CO.,LTD. 2013. ALL RIGHTS RESERVED