TRANSFORMER S cpu cooler
Published 2011-09-09
Additional remarks
Clip A supports for Intel LGA 1366 / 1156 / 1155.
Clip B supports for Intel LGA 775 / 1156 / 1155.
Suggestion: Clip A is more suitable for using with Intel LGA 1156.
For Intel-Pentium D / LGA 1366 / 1156 / 1155 / 775
STEP 1
Put the washers on the screws.
STEP 2
Put the screw into te hole on the motherboard and put another washer on the screw.
STEP 3
Screw the nut 2 onto the screw and tighten it.
STEP 4
Repeat steps 1 through 3 to fix the other 3 screws onto the motherboard,and then evenly spread the thermal grease on the CPU surface.
For AMD-Athelon 64 / Opteron ( Socket 754 / 939 / 940 / AM2 / AM2 + / AM3 )
STEP 1
Remove the original bracket.
STEP 2
Remove the original bracket.
STEP 3
Put the heat sink on the CPU, and buckle AMD clips with AMD plastic frame onto the motherboard.
(PS: Pass the AMD clips through the square hole and above the copper pillar). Press the clips and fix them.
STEP 4
Hook 4 rubber nails onto the cooler.Notice:rubber nails should be hooked on the side where the distance between the heat pipes is shorter;otherwise,it might affect the cooling performance.
COPYRIGHT EVERCOOL THERMAL CO.,LTD. 2013. ALL RIGHTS RESERVED